Pipe Staple Installation

insulation placed over the concrete sub-floor. A variety of screeds can be used and are typically 65-75mm thick for sand-cement types or 40-50mm for liquid pumped screeds. Floor coverings can be laid when the screed is fully cured.

• Quick to Install
• Can be used with traditional and liquid screeds
• Easily Adaptable to irregular room shapes
• Cost Effective
• Suitable for all pipe layout patterns.

Things to keep in mind:

- Insulation depth as required by design or building regulations and to ensure that any downward heat loss does not exceed 10 watts per m/2 in accordance with BSEN1264

- The overall quality and thickness of a sand and cement screed should meet the requirements of BS8204-1.